出版品


首页 > 关于中钢> 技术创新 > 活动与奖项 > 出版品

    中钢技报 第三十期 December 2017 NO.30

    The Characteristics of Strain Induced Transformation....... Mushroom Formation by Water Model for Double-tuyere.......
    The Simulation of Burning-off the Deposited Carbon....... Gloss Promotion of Aluminum Sheets by Tribology.......
    Failure Analysis of Coating Adhesion. Performance Improvement.
    Hot Deformation Behavior of Ti-6Al-4V Alloy in α and....... 8-Regeneration of the Deactivated SCR Catalysts
    Real-Time Annealing History of Cold Rolled 3104 Aluminum Alloy....... Optimal Operation of Compressed Air Station.......
    The Development of On-Line Balancing System for Rotating....... The Improvement on Decarburization of S55C for the.......

    中钢技报 第二十九期 December 2016 NO.29

    The Effect of Niobium and Molybdenum Co-Addition on ....... Development of H13 ESR Hot Work Tool Steels .......
    Effect of Oxygen Blowing Parameters on the Performance ....... Development of Anti-Scaling Technology in Spraying.......
    Development of Wireless Temperature Monitoring System ....... High Efficiency Operation Method for Solid Oxide .......
    Strength Estimation of Bosh Coke Based on BF Conditions....... Influence of Si Addition on the Recrystallization Texture.......
    Effects of Nb-Addition on Carburizing Treatment for Low ....... Dynamic Cooling Process Control Technology for .......
    Analysis of UF Membranes at the Industrial Wastewater ....... The Improvement of High Pressure Descaling Efficiency.......
    Structure and Magnetic Properties of Mn and Al Doped .......

    中钢技报 第二十八期 December 2015 NO.28

    Texture Improvement of 3% .... Effect of Cleaning Conditions on Heat Seal Strength between ....
    An Application of Coke Microstructure .... Application and Breakthrough of BOF Slag ....
    Batch Annealing Model for Cold Rolled Coils .... Numerical Simulation of the Flue Gas Desulfurization ....
    The Development of the Rolling Technology .... Innovative Operation Strategies for Improving Energy ....
    Adaptive Mold Level Control in a Continuous .... Effects of Mn Content on Recrystallization Behavior ....
    Surface Rolled-in Defects of Titanium .... Successful Integration of Partial FGD and ....
    7--The Performances of Electrical Double-layer ....

    中钢技报 第二十七期 December 2014 NO.27

    Examples in Material Flow Analysis Enhancing Figure of Merit of Bi0.5Sb1.5Te3 ...
    Water Modeling of Mushroom formations ... Microstructure observation and high-temperature ...
    Effect of Volatile Matter Content of Coal ........ Measurement of Dust Control Efficiency of Wind Screens...
    Development of On-line Control Model for CSC #2 .... An Emulsification Method of Bio-oils in Diesel
    Development of Amorphous Ribbon Manufacturing Technology Hot Deformation Resistance of an AA5083 Alloy
    The Study of Flash Butt Welding of High Si ...
    A Comprehensive Performance Evaluation on an Antiscalant...

    中钢技报 第二十六期 December 2013 NO.26

    Effects of Deoxidation during RH Refining on the Cleanlin Composition Variation in Incoloy 800H Alloy Ingot during
    Simulation of Heat Transfer of Defective Copper Stave... A Strategy to Monitor AGC in Consideration of Rolling For
    Investigation of Die Quench Properties of Hot Stamping St Annealing and Galvanizing Reactions of
    Development of a Corrosion Inhibitor for the Closed-loop HF Absorption and Static Electromagnetic Properties of Ni
    Study of Liquation-induced Crack Formation in A-286 Supe Correlating Fabrication Processes to the Microstructure
    Corrosion Prevention in the Circulation Loop Oil Process Application of EDR for Wastewater Reclamation and Reuse
    Energy Reduction of CO2 Capture by New Absorbents Develo

    中钢技报 第二十五期 December 2012 NO.25

    Effects of Alloying and Step Cooling Conditions on the Influence of Hot Metal Composition on Ar-1%Mg Gas-Metal
    Central Segregation Improvement of No. 3 Bloom Caster at Development of a Channeling Prediction System for a Blast
    Development of Steel Production and Logistics Automation Development of a Continuous Rolling Process for Titanium
    Preparation of Activated Carbon for ElectricDouble Layer High-Performance Chromium-Free Coatings for Electrical St
    Development of Manganese Build-up Resistant Cermet Coatin An Investigation into Hot Deformation Resistance of an
    A Novel Temperature Diagnostic System for Stelmor Air-Co

    中钢技报 第二十四 Dec.30,2010 NO.23

    Effects of Annealing Conditions on Bake Hardenability for ULC Steels Forming Factors of Blowhole Defect in Continuously-Cast Beam...
    The Influence of Intrinsic Drifting and Extrinsic Driving Control Method for Low Oxygen Concentration in Reheating...
    Microstructure and Properties of Thermal Sprayed WC-CrC-Ni... The Development of M48 High–strength Bolt Steel for Wind...
    Influence of Clay, Silicate and Carbon Black on the Environmental Evolution of Black Cauliflower-like Precipitates on the Surface...
    A Study of the Microstructure, Texture and Sputtering Properties... Isolating Multiple Sensor Faults Based on Self-Contribution Plots...
    TECHNOLOGY DEVELOPMENT OF ENERGY SAVING AND... 3D-Evaluation Method for Descaling Capability of Hot Strip Mill

    中钢技报 第二十二期 Dec.30,2009 NO.22

    Development of Screwdriver Bit Steel with High Hardness... Development of Ultra High Strength Mn-B Steels for Automobile ...
    Clogging Mechanism of Ladle Nozzle in Bloom Casting Analysis of Sponge Cracks of 50BV30 Microalloyed Steel ....
    Investigation of Titanium Compound Formation in the Blast..... Influence of the Feathery Crystal on the Tensile Behavior of ....
    Effect of Casting Parameters on Microstructure and Casting.... The Morphological Study of a Novel Non-Chromate Coating on ...
    Development of Anti-Splashing Taphole Mud Failure Analysis for the Economizer Tube of the Waste Heat Boiler
    Establishing an Advanced Technique to Analyze Ultr ..... Exergy Analysis of a Coke Dry Quenching System

    中钢技报 第二十一期 Dec.30,2009 NO.21

    Investigations of Microstructure and Phosphorus Distribution..... Cracking Mechanism of High Carbon Slab after....
    The Thermal Behavior Analysis in Tap-Hole Area Effect of Magnesium Oxide Content on Final Slag Fluidity of....
    Electromagnetic Force Predictions of a Stand Electromagnetic Thermal Compensation of Work Roll Grinding in Hot Strip Mills
    The Application of Phosphate Treatment for Chromium-Free ... Influence of Rolling Chemicals on Temper Rolling Process and...
    Effect of Ni Content in a Low Alloy Steel on the High Temperature..... On-Line Fault Detection and Classification for a Compressor Process...
    Heat and Fluid Flow Analysis over Different Tube Inserts ......
  • 最佳浏览分辨率
  • 1280*800
  • 累积人次
  • 总公司
  • 812高雄市小港区中钢路1号
    TEL:(07)802-1111
    FAX:(07)802-2511
  • 中钢集团总部大楼
  • 806高雄市前镇区成功二路88号
    TEL:(07)337-1111
    FAX:(07)537-3570