出版品

中鋼技報 第三十七期 December 2024 NO.37

China Steel Technical Report No.37 .......	Development of Abrasion-Resistant Steel Plates with.......
Effect of Post-Blowing CO2 and CO2-Ar Mixture in BOF.......	Reaction Behavior in Lower Part of Blast Furnace with.......
Development of Numerical Simulation to Predict the.......	The Development of Hot Forming 7075 High Strength Aluminum .......
Improving the Surface Quality of Ultra-high Efficiency.......	Development of Time-Shortened Spheroidization Process to.......
Development of Hot-rolled CSC HM550Y-FB Hole Expansion.......	Development of Lubricating Coated Galvannealed Steel for .......
Pilot-Scale Study on Medium-Low Temperature SCR Catalyst for.......	Development of Finely Reduced Iron Powder (FRIP) for Metal.......
Investigation of 5052 Aluminum Melt Cleanliness with High.......	The Development of 6061 Aluminum Plate for Semiconductor.......
Stacking Technology for Motor Core Laminations in Punching.......	Operational Influence on the Efficiency of Pressure.......
Utilizing Retrieval-Augmented Generation-based LLM for.......	Scalable AI Training in Hybrid Cloud Environments for Enhancing.......
Development of Efficient Process Cooling Water Treatment.......	Development of Bottom Blowing Distribution Design on Top and.......
The Study of the Environmental Characteristics and Engineering.......

中鋼技報 第三十六期 December 2023 NO.36

China Steel Technical Report No.36 .......	The Mechanism of Low Ductility Failures of a Medium- .......
Theoretical Analysis and Technology Development .......	Optimizing the Coke Oven Temperature by Introducing .......
Cooling process optimization for hot-rolled medium carbon .......	Heat Treatment to Improve the Torsional Properties .......
Development of High Strength, High Toughness Offshore .......	Development of Precision Rolling Process Technology .......
Development of High-Grade Cold Rolled Steel with Ultra-high .......	A Study on the Oxidation Behavior of Self-Sintered .......
Post-Annealing Adhesion Capability of the Chromium-free .......	A Study on the Comparison of Heterocyclic and Alkynol .......
Corrosion Resistance and Microstructure of Alumina-Magnesia .......	The Anisotropic Properties of Rolled Pure Titanium Sheet .......
The Development of Cold Optical Surface Inspection System .......	The Development of Feed-Forward Control Aided Method .......
Developing a Multi-User Shared Experience XR Touring System .......	Development of Two-Dimensional Acoustic Temperature .......
Premature Failure Analysis of Mill Rolls at China Steel Corp .......

中鋼技報 第三十五期 December 2022 NO.35

China Steel Technical Report No.35 .......	Effects of the Cooling Path on Microstructure .......
Analysis of Temperature Dropping of Molten Steel.......	Design and Welding of Nodes for Offshore .......
Development of Chamfered Mold Technology for Slab .......	Development of Bolt Steel SCM435 Omitting .......
Low Temperature Rolling Technology for Coil Shape .......	The Effect of Rheological Feature of Graphene .......
Improvement of Alumina-Magnesia Castables for .......	Effect of Adding Pr-Co Powder in Recycled .......
Two-Step Quench Process for the 6061 .......	Development of Conveyor Belt Fire Detection .......
Development and Application of Numerical Thermal .......	Development of Intelligent Monitoring and .......
The Comparison of LSTM and XGB Prediction Model .......	Treatment of Cleaning Wastewater from the .......
Failure Analysis of Various Rolling Mill Equipment .......	Thermal Stress Analysis on the Inner Cover .......
Development of Level 2 Auto Pacing Control in CSC .......

中鋼技報 第三十四期 December 2021 NO.34

China Steel Technical Report No.34 .......	Development of a new low-loss and high-permeability .......
Detection of mold level fluctuation in the continuous .......	Heat Efficiency Improvement of Iron Ore .......
Development of a Residual Stress Sensor and its .......	Development of Pre-heating Spheroidization technology .......
Development of High-Performance Silicon-Carbon .......	Effect of Ferro-Silicon Nitride Addition .......
Oxidation of Elemental Mercury over SCR Catalysts .......	Influence of Si/Mg, Cu Content and Aging Condition .......
Research of Character Recognition on Billet Surface .......	Measurement Method of Effective Elastic Modulus .......
Development of a real-time raw material stockpile .......	Development of Immersive Steel Tapping Training System .......
Improvement to Welding Seam Breakage Rate at TCM .......

中鋼技報 第三十三期 December 2020 NO.33

China Steel Technical Report No.33 .......	Development of the 550MPa Grade Hot-dipped Galvanized .......
Energy Saving Technology for Lowering Air Leakage .......	Seam Defects in Bar Rolling with Consideration .......
Prevention of Ferrite Decarburization of Spring Steel .......	Characterization and Application of Chromium-free .......
Improvement in Free Opening Performance of .......	Development of Gyromagnetic and Dielectric Materials .......
Laser-Induced Breakdown Spectroscopy Assisted Chemometric .......	Simulation Analysis of the Influence of Electrical Steel .......
Investigation on the Properties of Carbonated Basic .......	Investigation and Improvement of Molten Zinc Corrosion .......
Development of RFID Automatic Warehouse Management .......	Time Series Regression and Instance-Based Learning for .......
1Prediction Model of Blast Furnace Molten Iron .......

中鋼技報 第三十二期 December 2019 NO.32

Grain Coarsening Resistance of Low-Carbon Drawn Wire .......	Development of High-Efficiency Melting Technology for.......
Experience of Salamander Tapping for Blast Furnace Relining.......	Deformation Analysis Based on Residual Stresses in Aluminum.......
Development of Electrical Steel Grade 25CS1250HF for.......	Effects of Furnace Atmosphere on the Post-Annealing Adhesion.......
Hot Slag Modification of BOF Slag for Preventing its.......	Influence of Particle Size on Microstructural and Magnetic.......
Application of Microbiological Monitoring Techniques at .......	The Influence of Mg and Cr Addition on the Anodizing.......
Energy-efficient Operation Strategy for Air Compressor.......	Development of Automatic Tapering Segments in a .......
Ceramic Welding for No.31 Hot Stove Wall of and.......

中鋼技報 第三十一期 December 2018 NO.31

The Development of High-Strength Steel of 980MPa Grade.......	Transport Phenomena in Bottom Blown Bath by O2, CO2.......
Development of Mist Cooling Process for Spring Steel.......	The effect of flocculant used for basic oxygen.......
Influence of SSA and particle size distribution of.......	Effects of Filler Metal Composition on Joining Properties.......
Development and Application of an On-site Continuous.......	Microstructural Simulation of a 5052 Aluminum Alloy.......
Development of the Cross-Linked Integrated Information.......	Effect of Staged Air Combustion on the Temperature of.......
The Investigation on the Energy Absorption Performance.......	Effect of Annealing Atmosphere Control on Phosphating.......
Fold mark characterization using a magnetostrictive.......

中鋼技報 第三十期 December 2017 NO.30

The Characteristics of Strain Induced Transformation.......	Mushroom Formation by Water Model for Double-tuyere.......
The Simulation of Burning-off the Deposited Carbon.......	Gloss Promotion of Aluminum Sheets by Tribology.......
Failure Analysis of Coating Adhesion.	Performance Improvement.
Hot Deformation Behavior of Ti-6Al-4V Alloy in α and.......	8-Regeneration of the Deactivated SCR Catalysts
Real-Time Annealing History of Cold Rolled 3104 Aluminum Alloy.......	Optimal Operation of Compressed Air Station.......
The Development of On-Line Balancing System for Rotating.......	The Improvement on Decarburization of S55C for the.......

中鋼技報 第二十九期 December 2016 NO.29

The Effect of Niobium and Molybdenum Co-Addition on .......	Development of H13 ESR Hot Work Tool Steels .......
Effect of Oxygen Blowing Parameters on the Performance .......	Development of Anti-Scaling Technology in Spraying.......
Development of Wireless Temperature Monitoring System .......	High Efficiency Operation Method for Solid Oxide .......
Strength Estimation of Bosh Coke Based on BF Conditions.......	Influence of Si Addition on the Recrystallization Texture.......
Effects of Nb-Addition on Carburizing Treatment for Low .......	Dynamic Cooling Process Control Technology for .......
Analysis of UF Membranes at the Industrial Wastewater .......	The Improvement of High Pressure Descaling Efficiency.......
Structure and Magnetic Properties of Mn and Al Doped .......

中鋼技報 第二十八期 December 2015 NO.28

Texture Improvement of 3% ....	Effect of Cleaning Conditions on Heat Seal Strength between ....
An Application of Coke Microstructure ....	Application and Breakthrough of BOF Slag ....
Batch Annealing Model for Cold Rolled Coils ....	Numerical Simulation of the Flue Gas Desulfurization ....
The Development of the Rolling Technology ....	Innovative Operation Strategies for Improving Energy ....
Adaptive Mold Level Control in a Continuous ....	Effects of Mn Content on Recrystallization Behavior ....
Surface Rolled-in Defects of Titanium ....	Successful Integration of Partial FGD and ....
7--The Performances of Electrical Double-layer ....

中鋼技報 第二十七期 December 2014 NO.27

Examples in Material Flow Analysis	Enhancing Figure of Merit of Bi0.5Sb1.5Te3 ...
Water Modeling of Mushroom formations ...	Microstructure observation and high-temperature ...
Effect of Volatile Matter Content of Coal ........	Measurement of Dust Control Efficiency of Wind Screens...
Development of On-line Control Model for CSC #2 ....	An Emulsification Method of Bio-oils in Diesel
Development of Amorphous Ribbon Manufacturing Technology	Hot Deformation Resistance of an AA5083 Alloy
The Study of Flash Butt Welding of High Si ...
A Comprehensive Performance Evaluation on an Antiscalant...

中鋼技報 第二十六期 December 2013 NO.26

Effects of Deoxidation during RH Refining on the Cleanlin	Composition Variation in Incoloy 800H Alloy Ingot during
Simulation of Heat Transfer of Defective Copper Stave...	A Strategy to Monitor AGC in Consideration of Rolling For
Investigation of Die Quench Properties of Hot Stamping St	Annealing and Galvanizing Reactions of
Development of a Corrosion Inhibitor for the Closed-loop	HF Absorption and Static Electromagnetic Properties of Ni
Study of Liquation-induced Crack Formation in A-286 Supe	Correlating Fabrication Processes to the Microstructure
Corrosion Prevention in the Circulation Loop Oil Process	Application of EDR for Wastewater Reclamation and Reuse
Energy Reduction of CO2 Capture by New Absorbents Develo

中鋼技報 第二十五期 December 2012 NO.25

Effects of Alloying and Step Cooling Conditions on the	Influence of Hot Metal Composition on Ar-1%Mg Gas-Metal
Central Segregation Improvement of No. 3 Bloom Caster at	Development of a Channeling Prediction System for a Blast
Development of Steel Production and Logistics Automation	Development of a Continuous Rolling Process for Titanium
Preparation of Activated Carbon for ElectricDouble Layer	High-Performance Chromium-Free Coatings for Electrical St
Development of Manganese Build-up Resistant Cermet Coatin	An Investigation into Hot Deformation Resistance of an
A Novel Temperature Diagnostic System for Stelmor Air-Co

中鋼技報 第二十四 Dec.30,2010 NO.23

Effects of Annealing Conditions on Bake Hardenability for ULC Steels	Forming Factors of Blowhole Defect in Continuously-Cast Beam...
The Influence of Intrinsic Drifting and Extrinsic Driving	Control Method for Low Oxygen Concentration in Reheating...
Microstructure and Properties of Thermal Sprayed WC-CrC-Ni...	The Development of M48 High–strength Bolt Steel for Wind...
Influence of Clay, Silicate and Carbon Black on the Environmental	Evolution of Black Cauliflower-like Precipitates on the Surface...
A Study of the Microstructure, Texture and Sputtering Properties...	Isolating Multiple Sensor Faults Based on Self-Contribution Plots...
TECHNOLOGY DEVELOPMENT OF ENERGY SAVING AND...	3D-Evaluation Method for Descaling Capability of Hot Strip Mill

中鋼技報 第二十二期 Dec.30,2009 NO.22

Development of Screwdriver Bit Steel with High Hardness...	Development of Ultra High Strength Mn-B Steels for Automobile ...
Clogging Mechanism of Ladle Nozzle in Bloom Casting	Analysis of Sponge Cracks of 50BV30 Microalloyed Steel ....
Investigation of Titanium Compound Formation in the Blast.....	Influence of the Feathery Crystal on the Tensile Behavior of ....
Effect of Casting Parameters on Microstructure and Casting....	The Morphological Study of a Novel Non-Chromate Coating on ...
Development of Anti-Splashing Taphole Mud	Failure Analysis for the Economizer Tube of the Waste Heat Boiler
Establishing an Advanced Technique to Analyze Ultr .....	Exergy Analysis of a Coke Dry Quenching System

中鋼技報 第二十一期 Dec.30,2009 NO.21

Investigations of Microstructure and Phosphorus Distribution.....	Cracking Mechanism of High Carbon Slab after....
The Thermal Behavior Analysis in Tap-Hole Area	Effect of Magnesium Oxide Content on Final Slag Fluidity of....
Electromagnetic Force Predictions of a Stand Electromagnetic	Thermal Compensation of Work Roll Grinding in Hot Strip Mills
The Application of Phosphate Treatment for Chromium-Free ...	Influence of Rolling Chemicals on Temper Rolling Process and...
Effect of Ni Content in a Low Alloy Steel on the High ...	On-Line Fault Detection and Classification for a Compressor Process...
Heat and Fluid Flow Analysis over Different Tube Inserts ......